TechDeck Monitor Support
TechDeck Monitor is coming soon to the App Store.
Need help? Email hello@tech-deck.app. Please include the app version, your Mac (and iPhone or iPad) model and OS version, and the show equipment involved.
Common questions
How do I connect my iPhone or iPad?
Install TechDeck Monitor Companion from the App Store. On the Mac, open TechDeck Monitor ▸ iPhone & iPad and make sure “Let iPhones and iPads connect” is on; a six-digit pairing code is shown there. On the phone, open Settings, pick the Mac and type the code. The phone remembers it. Both devices must be on the same network.
My phone can't find the Mac.
Check that both are on the same network and that Local Network access is on for both apps (iPhone: Settings ▸ Privacy & Security ▸ Local Network; Mac: System Settings ▸ Privacy & Security ▸ Local Network). Guest Wi-Fi networks often block devices from seeing each other; use the show network or a show iPad on it.
The phone says the pairing code is wrong.
Codes change when someone clicks New Pairing Code on the Mac. Type the code currently shown on the Mac's iPhone & iPad page.
Nothing shows on the Monitor page.
Send OSC to one of the Mac addresses shown at the top of the Monitor page, on the UDP port shown there (8000 unless you changed it). Click Send Test to check the page itself is working.
How does main / backup sync work?
Add both QLab Macs (or both MIDI inputs) on the Devices page and pair them. TechDeck Monitor compares the workspace, standing-by cue, last GO and running cues, and raises an alert if they disagree for longer than the grace window.
QLab won't connect.
In QLab, open Workspace Settings ▸ Network ▸ OSC Access and make a passcode with view permission. Add the QLab device on the Devices page, choose the Mac from the list and enter the passcode.
How do I check a MIDI device is talking?
MIDI inputs show a Receiving light while messages arrive. For outputs, click Check on the Devices page: many devices answer an identity request with their make and model. Software and some gear never answer, so a test cue is the only sure check for those.
Does it make a sound when something goes wrong?
Never. Alerts are a flashing red bar on the Mac, the Clock Display and paired phones. Acknowledge (Esc) stops the flashing.
Can the lighting console arm the show?
Yes. Send /techdeck/monitor/arm (and disarm, hold, house, note) over OSC. The full list is in Help ▸ Remote control. You can limit which addresses are accepted on the Devices page.
Where are my reports?
Every disarmed performance is on the Performances page. Add notes there and save the report as PDF, CSV or text.
TechDeck Monitor is an independent app and is not affiliated with or endorsed by Figure 53 or Electronic Theatre Controls. QLab is a trademark of Figure 53, LLC. ETC and Eos are trademarks of Electronic Theatre Controls, Inc.